banner
Home / Blog / YETI Recalls 1.9 Million Soft Coolers and Gear Cases Due to Magnet Ingestion Hazard
Blog

YETI Recalls 1.9 Million Soft Coolers and Gear Cases Due to Magnet Ingestion Hazard

Nov 11, 2023Nov 11, 2023

The magnet-lined closures can fail and result in detached magnets, posing a risk of serious injury or death if ingested. When two or more high-powered magnets are swallowed, the ingested magnets can attract to each other, or to another metal object, and become lodged in the digestive system. This can result in perforations, twisting and/or blockage of the intestines, infection, blood poisoning and death.

About 1.9 million (In addition, about 40,760 were sold in Canada)

YETI toll-free at 833-444-3151 from from 7 a.m. to 7 p.m. CT Monday through Friday and 9 a.m. to 6 p.m. CT Saturday and Sunday, email at [email protected] or online at https://www.yeti.com/M20-M30-sidekick-product-recall.html or at www.yeti.com and click on "Product Recall" at the bottom of the page for more information.

This recall involves the YETI Hopper M30 Soft Cooler 1.0 and 2.0, Hopper M20 Soft Backpack Cooler and SideKick Dry Gear Case. The products have a main-pocket closure lined with high-powered magnets, which are enclosed in a heat-sealed plastic strip. The M20 Soft Backpack Cooler measures about 18 inches wide and 18 inches high; the M30 Soft Cooler 1.0 and 2.0 is about 25 inches wide and 17 inches high; and the SideKick Dry Gear Case is about 11 inches wide and 7 inches high. The recalled coolers and gear cases were sold in a variety of colors and with the brand name YETI displayed on the front. A hang tag with the product name is attached to the coolers and gear cases.

Consumers should immediately stop using the recalled products and contact YETI to receive a full refund or replacement product. Visit www.yeti.com for instructions on returning the product free of charge for the choice of a suggested replacement product of equal or greater value or full refund in the form of a YETI gift card with an additional $25 value.

The firm has received 1,399 reports of the magnet-lined closures degrading or failing, including reports of missing or detached magnets. No magnet ingestions or injuries have been reported.

YETI Coolers LLC, of Austin, Texas

Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.

The rear wheel can loosen or fall off the scooter, posing a fall hazard to children.

The paint on the recalled electric bikes contains levels of lead that exceed the federal lead paint ban, posing a lead poisoning hazard. Lead is toxic if ingested by young children and can cause adverse health issues.

The recalled helmets do not comply with the positional stability requirement of the CPSC federal safety standard for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

The recalled bicycle stems can crack and break while in use and cause the rider to lose control, posing a risk of injury to the user in a crash.

A fuel leak can occur at the fuel pump assembly joint on the fuel tank in close proximity to a hot surface, posing a fire hazard.

The bike's seat post assembly can break during use, posing fall and injury hazards to the user.

The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.

Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.